#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include <parserutils/charset/mibenum.h>
#include "charset/codecs/codec_impl.h"
#include "utils/endian.h"
#include "utils/utils.h"

Data Structures
struct	charset_ascii_codec
	US-ASCII charset codec. More...
Defines
#define	READ_BUFSIZE (8)
#define	WRITE_BUFSIZE (8)
Typedefs
typedef struct charset_ascii_codec	charset_ascii_codec
	US-ASCII charset codec.
Functions
static bool	charset_ascii_codec_handles_charset (const char *charset)
	Determine whether this codec handles a specific charset.
static parserutils_error	charset_ascii_codec_create (const char charset, parserutils_charset_codec *codec)
	Create a US-ASCII codec.
static parserutils_error	charset_ascii_codec_destroy (parserutils_charset_codec *codec)
	Destroy a US-ASCII codec.
static parserutils_error	charset_ascii_codec_encode (parserutils_charset_codec codec, const uint8_t source, size_t sourcelen, uint8_t *dest, size_t destlen)
	Encode a chunk of UCS-4 (big endian) data into US-ASCII.
static parserutils_error	charset_ascii_codec_decode (parserutils_charset_codec codec, const uint8_t source, size_t sourcelen, uint8_t *dest, size_t destlen)
	Decode a chunk of US-ASCII data into UCS-4 (big endian)
static parserutils_error	charset_ascii_codec_reset (parserutils_charset_codec *codec)
	Clear a US-ASCII codec's encoding state.
static parserutils_error	charset_ascii_codec_read_char (charset_ascii_codec c, const uint8_t source, size_t sourcelen, uint8_t *dest, size_t destlen)
	Read a character from US-ASCII to UCS-4 (big endian)
static parserutils_error	charset_ascii_codec_output_decoded_char (charset_ascii_codec c, uint32_t ucs4, uint8_t dest, size_t destlen)
	Output a UCS-4 character (big endian)
static parserutils_error	charset_ascii_from_ucs4 (charset_ascii_codec c, uint32_t ucs4, uint8_t s, size_t len)
	Convert a UCS4 (host endian) character to US-ASCII.
static parserutils_error	charset_ascii_to_ucs4 (charset_ascii_codec c, const uint8_t s, size_t len, uint32_t *ucs4)
	Convert a US-ASCII character to UCS4 (host endian)
Variables
const parserutils_charset_handler	charset_ascii_codec_handler

Define Documentation

#define READ_BUFSIZE (8)

Definition at line 24 of file codec_ascii.c.

#define WRITE_BUFSIZE (8)

Definition at line 30 of file codec_ascii.c.

Referenced by charset_ascii_codec_encode().

Typedef Documentation

typedef struct charset_ascii_codec charset_ascii_codec

US-ASCII charset codec.

Function Documentation

parserutils_error charset_ascii_codec_create	(	const char *	charset,
		parserutils_charset_codec **	codec
	)		`[static]`

Create a US-ASCII codec.

Parameters:

charset	The charset to read from / write to
codec	Pointer to location to receive codec

Returns:: PARSERUTILS_OK on success, PARSERUTILS_BADPARM on bad parameters, PARSERUTILS_NOMEM on memory exhausion

Definition at line 97 of file codec_ascii.c.

parserutils_error charset_ascii_codec_decode	(	parserutils_charset_codec *	codec,
		const uint8_t **	source,
		size_t *	sourcelen,
		uint8_t **	dest,
		size_t *	destlen
	)		`[static]`

Decode a chunk of US-ASCII data into UCS-4 (big endian)

Parameters:

codec	The codec to use
source	Pointer to pointer to source data
sourcelen	Pointer to length (in bytes) of source data
dest	Pointer to pointer to output buffer
destlen	Pointer to length (in bytes) of output buffer

Returns:: PARSERUTILS_OK on success, PARSERUTILS_NOMEM if output buffer is too small, PARSERUTILS_INVALID if a character cannot be represented and the codec's error handling mode is set to STRICT,

On exit, ::source will point immediately _after_ the last input character read, if the result is _OK or _NOMEM. Any remaining output for the character will be buffered by the codec for writing on the next call.

In the case of the result being _INVALID, ::source will point _at_ the last input character read; nothing will be written or buffered for the failed character. It is up to the client to fix the cause of the failure and retry the decoding process.

Note that, if failure occurs whilst attempting to write any output buffered by the last call, then ::source and ::sourcelen will remain unchanged (as nothing more has been read).

If STRICT error handling is configured and an illegal sequence is split over two calls, then _INVALID will be returned from the second call, but ::source will point mid-way through the invalid sequence (i.e. it will be unmodified over the second call). In addition, the internal incomplete-sequence buffer will be emptied, such that subsequent calls will progress, rather than re-evaluating the same invalid sequence.

::sourcelen will be reduced appropriately on exit.

::dest will point immediately _after_ the last character written.

::destlen will be reduced appropriately on exit.

Call this with a source length of 0 to flush the output buffer.

Definition at line 284 of file codec_ascii.c.

References charset_ascii_codec_read_char(), endian_host_to_big(), PARSERUTILS_NOMEM, PARSERUTILS_OK, charset_ascii_codec::read_buf, and charset_ascii_codec::read_len.

Referenced by charset_ascii_codec_create().

parserutils_error charset_ascii_codec_destroy ( parserutils_charset_codec * codec ) [static]

Destroy a US-ASCII codec.

Parameters:

codec The codec to destroy

Returns:: PARSERUTILS_OK on success, appropriate error otherwise

Definition at line 131 of file codec_ascii.c.

References PARSERUTILS_OK, and UNUSED.

Referenced by charset_ascii_codec_create().

parserutils_error charset_ascii_codec_encode	(	parserutils_charset_codec *	codec,
		const uint8_t **	source,
		size_t *	sourcelen,
		uint8_t **	dest,
		size_t *	destlen
	)		`[static]`

Encode a chunk of UCS-4 (big endian) data into US-ASCII.

Parameters:

codec	The codec to use
source	Pointer to pointer to source data
sourcelen	Pointer to length (in bytes) of source data
dest	Pointer to pointer to output buffer
destlen	Pointer to length (in bytes) of output buffer

Returns:: PARSERUTILS_OK on success, PARSERUTILS_NOMEM if output buffer is too small, PARSERUTILS_INVALID if a character cannot be represented and the codec's error handling mode is set to STRICT,

On exit, ::source will point immediately _after_ the last input character read. Any remaining output for the character will be buffered by the codec for writing on the next call.

Note that, if failure occurs whilst attempting to write any output buffered by the last call, then ::source and ::sourcelen will remain unchanged (as nothing more has been read).

::sourcelen will be reduced appropriately on exit.

::dest will point immediately _after_ the last character written.

::destlen will be reduced appropriately on exit.

Definition at line 165 of file codec_ascii.c.

References charset_ascii_from_ucs4(), endian_big_to_host(), len, PARSERUTILS_NOMEM, PARSERUTILS_OK, charset_ascii_codec::write_buf, WRITE_BUFSIZE, and charset_ascii_codec::write_len.

Referenced by charset_ascii_codec_create().

bool charset_ascii_codec_handles_charset ( const char * charset ) [static]

Determine whether this codec handles a specific charset.

Parameters:

charset Charset to test

Returns:: true if handleable, false otherwise

Definition at line 71 of file codec_ascii.c.

References parserutils_charset_mibenum_from_name(), and SLEN.

parserutils_error charset_ascii_codec_output_decoded_char	(	charset_ascii_codec *	c,
		uint32_t	ucs4,
		uint8_t **	dest,
		size_t *	destlen
	)		`[inline, static]`

Output a UCS-4 character (big endian)

Parameters:

c	Codec to use
ucs4	UCS-4 character (host endian)
dest	Pointer to pointer to output buffer
destlen	Pointer to output buffer length

Returns:: PARSERUTILS_OK on success, PARSERUTILS_NOMEM if output buffer is too small,

Definition at line 435 of file codec_ascii.c.

References endian_host_to_big(), PARSERUTILS_NOMEM, PARSERUTILS_OK, charset_ascii_codec::read_buf, and charset_ascii_codec::read_len.

Referenced by charset_ascii_codec_read_char().

parserutils_error charset_ascii_codec_read_char	(	charset_ascii_codec *	c,
		const uint8_t **	source,
		size_t *	sourcelen,
		uint8_t **	dest,
		size_t *	destlen
	)		`[inline, static]`

Read a character from US-ASCII to UCS-4 (big endian)

Parameters:

c	The codec
source	Pointer to pointer to source buffer (updated on exit)
sourcelen	Pointer to length of source buffer (updated on exit)
dest	Pointer to pointer to output buffer (updated on exit)
destlen	Pointer to length of output buffer (updated on exit)

Returns:: PARSERUTILS_OK on success, PARSERUTILS_NOMEM if output buffer is too small, PARSERUTILS_INVALID if a character cannot be represented and the codec's error handling mode is set to STRICT,

On exit, ::source will point immediately _after_ the last input character read, if the result is _OK or _NOMEM. Any remaining output for the character will be buffered by the codec for writing on the next call.

In the case of the result being _INVALID, ::source will point _at_ the last input character read; nothing will be written or buffered for the failed character. It is up to the client to fix the cause of the failure and retry the decoding process.

::sourcelen will be reduced appropriately on exit.

::dest will point immediately _after_ the last character written.

::destlen will be reduced appropriately on exit.

Definition at line 378 of file codec_ascii.c.

References charset_ascii_codec::base, charset_ascii_codec_output_decoded_char(), charset_ascii_to_ucs4(), parserutils_charset_codec::errormode, PARSERUTILS_CHARSET_CODEC_ERROR_STRICT, PARSERUTILS_INVALID, PARSERUTILS_NEEDDATA, PARSERUTILS_NOMEM, and PARSERUTILS_OK.

Referenced by charset_ascii_codec_decode().

parserutils_error charset_ascii_codec_reset ( parserutils_charset_codec * codec ) [static]

Clear a US-ASCII codec's encoding state.

Parameters:

codec The codec to reset

Returns:: PARSERUTILS_OK on success, appropriate error otherwise

Definition at line 336 of file codec_ascii.c.

References PARSERUTILS_OK, charset_ascii_codec::read_buf, charset_ascii_codec::read_len, charset_ascii_codec::write_buf, and charset_ascii_codec::write_len.

Referenced by charset_ascii_codec_create().

parserutils_error charset_ascii_from_ucs4	(	charset_ascii_codec *	c,
		uint32_t	ucs4,
		uint8_t **	s,
		size_t *	len
	)		`[inline, static]`

Convert a UCS4 (host endian) character to US-ASCII.

Parameters:

c	The codec instance
ucs4	The UCS4 character to convert
s	Pointer to pointer to destination buffer
len	Pointer to destination buffer length

Returns:: PARSERUTILS_OK on success, PARSERUTILS_NOMEM if there's insufficient space in the output buffer, PARSERUTILS_INVALID if the character cannot be represented

_INVALID will only be returned if the codec's conversion mode is STRICT. Otherwise, '?' will be output.

On successful conversion, *s and *len will be updated.

Definition at line 470 of file codec_ascii.c.

References charset_ascii_codec::base, parserutils_charset_codec::errormode, PARSERUTILS_CHARSET_CODEC_ERROR_STRICT, PARSERUTILS_INVALID, PARSERUTILS_NOMEM, and PARSERUTILS_OK.

Referenced by charset_ascii_codec_encode().

parserutils_error charset_ascii_to_ucs4	(	charset_ascii_codec *	c,
		const uint8_t *	s,
		size_t	len,
		uint32_t *	ucs4
	)		`[inline, static]`

Convert a US-ASCII character to UCS4 (host endian)

Parameters:

c	The codec instance
s	Pointer to source buffer
len	Source buffer length
ucs4	Pointer to destination buffer

Returns:: PARSERUTILS_OK on success, PARSERUTILS_NEEDDATA if there's insufficient input data PARSERUTILS_INVALID if the character cannot be represented

Definition at line 506 of file codec_ascii.c.

References PARSERUTILS_INVALID, PARSERUTILS_NEEDDATA, PARSERUTILS_OK, and UNUSED.

Referenced by charset_ascii_codec_read_char().

Variable Documentation

const parserutils_charset_handler charset_ascii_codec_handler

Initial value:

 {
        charset_ascii_codec_handles_charset,
        charset_ascii_codec_create
}

Definition at line 527 of file codec_ascii.c.

codec_ascii.c File Reference

Data Structures

Defines

Typedefs

Functions

Variables

Define Documentation

Typedef Documentation

Function Documentation

Variable Documentation