Audaspace  1.3.0
A high level audio library.
 All Classes Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
Class List
Here are the classes, structs, unions and interfaces with brief descriptions:
[detail level 12]
oCAccumulatorThis sound creates an accumulator reader
oCADSRThe ADSR effect implements the Attack-Delay-Sustain-Release behaviour of a sound
oCADSRReaderThis class is an ADSR filters
oCAnimateablePropertyThis class saves animation data for float properties
oCBarrierThis represents a barrier mechanism for thread sychronization
oCBaseIIRFilterReaderThis class is a base class for infinite impulse response filters
oCBinauralReaderThis class represents a reader for a sound that can sound different depending on its realtive position with the listener
oCBinauralSoundThis class represents a sound that can sound different depending on its realtive position with the listener
oCBufferThis class is a simple buffer in RAM which is 32 Byte aligned and provides resize functionality
oCBufferReaderThis class represents a simple reader from a buffer that exists in memory
oCButterworthThis sound creates a butterworth lowpass filter reader
oCButterworthCalculatorCalculates fourth order Butterworth low pass filter coefficients for a dynamic DynamicIIRFilter
oCCallbackIIRFilterReaderThis class provides an interface for infinite impulse response filters via a callback filter function
oCChannelMapperThis sound creates a reader that maps a sound source's channels to a specific output channel count
oCChannelMapperReaderThis class maps a sound source's channels to a specific output channel count
oCConverterThis sound creates a converter reader that is able to convert from one audio format to another
oCConverterReaderThis class converts a sound source from one to another format
oCConvolverThis class allows to convolve a sound with a very large impulse response
oCConvolverReaderThis class represents a reader for a sound that can be modified depending on a given impulse response
oCConvolverSoundThis class represents a sound that can be modified depending on a given impulse response
oCDefaultSynchronizerThis class is a default ISynchronizer implementation that actually does no synchronization and is intended for devices that don't support it
oCDelayThis sound plays another sound delayed
oCDelayReaderThis class reads another reader and delays it
oCDeviceExceptionUsed for error cases in connection with devices, which usually happens when specific features or requests cannot be fulfilled by a device, for example when the device is opened
oCDeviceManagerThis class manages all device plugins and maintains a device if asked to do so
oCDeviceSpecsSpecification of a sound device
oCDoubleThis sound plays two other factories behind each other
oCDoubleReaderThis reader plays two readers sequently
oCDynamicIIRFilterThis sound creates a IIR filter reader
oCDynamicIIRFilterReaderThis class is for dynamic infinite impulse response filters with simple coefficients that change depending on the sample rate
oCDynamicMusicThis class allows to play music depending on a current "scene", scene changes are managed by the class
oCEffectThis sound is a base class for all effect factories that take one other sound as input
oCEffectReaderThis reader is a base class for all effect readers that take one other reader as input
oCEnvelopeThis sound creates an envelope follower reader
oCExceptionGeneral exception base class
oCFaderThis sound fades another sound
oCFaderReaderThis class fades another reader
oCFFMPEGThis plugin class reads and writes sounds via ffmpeg
oCFFMPEGReaderThis class reads a sound file via ffmpeg
oCFFMPEGWriterThis class writes a sound file via ffmpeg
oCFFTConvolverThis class allows to easily convolve a sound using the Fourier transform
oCFFTPlanThas class represents an plan object that allows to calculate FFTs and IFFTs
oCFileThe File sound tries to read a sound file via all available file inputs that have been registered in the FileManager class
oCFileExceptionUsed for error cases in which files cannot be read or written due to unknown containers or codecs
oCFileManagerThe FileManager manages all file input and output plugins
oCFileWriterAble to create IWriter classes as well as write readers to them
oCHighpassThis sound creates a highpass filter reader
oCHighpassCalculatorCalculates high pass filter coefficients for a dynamic DynamicIIRFilter
oCHRTFThis class represents a complete set of HRTFs
oCHRTFLoaderThis loader provides a method to load all the HRTFs in one directory, provided they follow the following naming scheme: Example: L-10e210a.wav The first character refers to the ear from which the HRTF was recorded: 'L' for a left ear and 'R' for a right ear
oCI3DDeviceThe I3DDevice interface represents an output device for 3D sound
oCI3DHandleThe I3DHandle interface represents a playback handle for 3D sources
oCIDeviceThe IDevice interface represents an output device for sound sources
oCIDeviceFactoryThe IDeviceFactory interface opens an output device
oCIDynamicIIRFilterCalculatorThis interface calculates dynamic filter coefficients which depend on the sampling rate for DynamicIIRFilterReaders
oCIFileInputThe IFileInput interface represents a file input plugin that can create file input readers from filenames or buffers
oCIFileOutputThe IFileOutput interface represents a file output plugin that can write files
oCIHandleThe IHandle interface represents a playback handles of a specific device
oCIIRFilterThis sound creates a IIR filter reader
oCIIRFilterReaderThis class is for infinite impulse response filters with simple coefficients
oCILockableThis class provides an interface for lockable objects
oCImpulseResponseThis class represents an impulse response that can be used in convolution
oCIReaderThis class represents a sound source as stream or as buffer which can be read for example by another reader, a device or whatever
oCISoundThis class represents a type of sound source and saves the necessary values for it
oCISynchronizerThis class enables global synchronization of several audio applications if supported
oCIWriterThis class represents a sound sink where audio data can be written to
oCJackDeviceThis device plays back through JACK
oCJackSynchronizerThis class is a Synchronizer implementation using JACK Transport
oCJOSResampleThis sound creates a resampling reader that does Julius O
oCJOSResampleReaderThis resampling reader uses Julius O
oCLimiterThis sound limits another sound in start and end time
oCLimiterReaderThis reader limits another reader in start and end times
oCLinearResampleThis sound creates a resampling reader that does simple linear resampling
oCLinearResampleReaderThis resampling reader does simple first-order hold resampling
oCLoopThis sound loops another sound
oCLoopReaderThis class reads another reader and loops it
oCLowpassThis sound creates a lowpass filter reader
oCLowpassCalculatorCalculates low pass filter coefficients for a dynamic DynamicIIRFilter
oCMixerThis abstract class is able to mix audiosignals with same channel count and sample rate and convert it to a specific output format
oCMutableReaderThis class represents a reader for a sound that can change with each playback
oCMutableSoundThs class allows to create MutableReaders for any sound
oCNULLDeviceThis device plays nothing
oCOpenALDeviceThis device plays through OpenAL
oCOpenALReaderThis class is used for sine tone playback
oCPingPongThis sound plays another sound first normal, then reversed
oCPitchThis sound changes the pitch of another sound
oCPitchReaderThis class reads another reader and changes it's pitch
oCPlaybackCategoryThis class represents a category of related sounds which are currently playing and allows to control them easily
oCPlaybackManagerThis class allows to control groups of playing sounds easily
oCPluginManagerThis manager provides utilities for plugin loading
oCQuaternionThis class represents a quaternion used for 3D rotations
oCReadDeviceThis device enables to let the user read raw data out of it
oCResampleReaderThis is the base class for all resampling readers
oCReverseThis sound reads another sound reverted
oCReverseReaderThis class reads another reader from back to front
oCSawtoothThis sound creates a reader that plays a sawtooth tone
oCSawtoothReaderThis class is used for sawtooth tone playback
oCSDLDeviceThis device plays back through SDL, the simple direct media layer
oCSequenceThis sound represents sequenced entries to play a sound scene
oCSequenceDataThis class represents sequenced entries to play a sound scene
oCSequenceEntryThis class represents a sequenced entry in a sequencer sound
oCSequenceReaderThis reader plays back sequenced entries
oCSilenceThis sound creates a reader that plays silence
oCSilenceReaderThis class is used for silence playback
oCSineThis sound creates a reader that plays a sine tone
oCSineReaderThis class is used for sine tone playback
oCSndFileThis plugin class reads and writes sounds via libsndfile
oCSndFileReaderThis class reads a sound file via libsndfile
oCSndFileWriterThis class writes a sound file via libsndfile
oCSoftwareDeviceThe software device is a generic device with software mixing
oCSoundListThis class allows to have a list of sound that will play sequentially or randomly with each playback
oCSourceThis class stores the azimuth and elevation angles of a sound and allows to change them dynamically
oCSpecsSpecification of a sound source
oCSpecsChangerThis sound is a base class for all mixer factories
oCSquareThis sound creates a reader that plays a square tone
oCSquareReaderThis class is used for square tone playback
oCStateExceptionUsed for error cases of sounds or readers with illegal states or requirements for states of dependent classes
oCStreamBufferThis sound creates a buffer out of a reader
oCSumThis sound creates a sum reader
oCSuperposeThis sound mixes two other factories, playing them the same time
oCSuperposeReaderThis reader plays two readers with the same specs in parallel
oCThreadPoolThis represents pool of threads
oCThresholdThis sound Transforms any signal to a square signal by thresholding
oCTriangleThis sound creates a reader that plays a triangle tone
oCTriangleReaderThis class is used for sawtooth tone playback
oCVector3This class represents a 3 dimensional vector
oCVolumeThis sound changes the volume of another sound
oCVolumeReaderThis class represents a reader for a sound that has its own shared volume
oCVolumeSoundThis class allows to create a sound with its own volume
\CVolumeStorageThis class stores a volume value and allows to change if for a number of sounds in one go